PURITY ANALYSIS METHOD OF 1-METHYL-3,5-DINITRO-1<i>H</i>-1,2,4-TRIAZOLE

Authors

  • Jin Luo School of Chemical Engineering and Environment, North University of China, Taiyuan 030051
  • Yu-cun Liu School of Chemical Engineering and Environment, North University of China, Taiyuan 030051
  • Yan Liu School of Chemical Engineering and Environment, North University of China, Taiyuan 030051
  • Guo-Dong Wang Department of Ammunition Engineering, Ordnance Engineering College, Shijiazhuang 050003
  • Jian-hua Wang School of Chemical Engineering and Environment, North University of China, Taiyuan 030051
  • Jun-Ming Yuan School of Chemical Engineering and Environment, North University of China, Taiyuan 030051

DOI:

https://doi.org/10.1007/3679

Keywords:

1-methyl-3, 5-dinitro-1H-1, 2, 4-triazole, 1-methyl-3-nitro-1H-1, 4-triazol-5-amine, analytical chemistry, HPLC, purity analysis

Abstract

A HPLC method was established to analyze main ingredient – 1-methyl-3,5-dinitro-1H-1,2,4-triazole and the main impurity – 1-methyl-3-nitro-1H-1,2,4-triazol-5-amine. The method was carried out on a SinoChrom ODS-BP column (4.6 × 200 mm, 5 μm) using methanol–water (90/10, v/v) as the mobile phase at a flow rate of 1.0 ml·min–1. 1-Methyl-3,5-dinitro-1H-1,2,4-triazole was determined by UV-visible detector at 240 nm. The column temperature was 25°C and the injection volume was 10 μl. Results show that under the optimized chromatographic conditions, the calibration curves of 1-methyl-3,5-dinitro-1H-1,2,4-triazole and 1-methyl-3-nitro-1H-1,2,4-tiazol-5-amine have good linearity, and the linear correlation coefficient r is greater than 0.999. The detection limits for 1-methyl-3,5-dinitro-1H-1,2,4-triazole and 1-methyl-3-nitro-1H-1,2,4-triazol-5-amine were 0.6 and 0.31 mg·ml–1, respectively, and the quantification limits were 1.02 and 0.53 mg·ml–1, respectively. The recoveries are 98.17–100.83% with the relative standard deviations between 0.44 and 1.01%. The method has wide linear range, high sensitivity, and good reproducibility, and the results are accurate and reliable.

Published

2017-11-29

Issue

Section

Original Papers